Input And Output Patching; Cl Console Internal Patching And Dante Audio Network Patching - Yamaha CL5 Reference Manual

Input and output patching

This chapter explains how to edit the input patching and output patching, how to connect
inserts, and how to use direct outputs.
When the CL series is in the initial state, the following input ports (jacks/ports) are patched to
each input channel.
For CL5
Input channels
CH1-48 DANTE1-48
CH49-64 DANTE49-64
CH65-72 OMNI1-8
ST IN 1L-8R FX 1L(A)-FX 8R(B)
For CL3
Input channels
CH1-48 DANTE1-48
CH49-64 DANTE49-64
ST IN 1L-8R FX 1L(A)-FX 8R(B)
For CL1
Input channels
CH1-48 DANTE1-48
ST IN 1L-8R FX 1L(A)-FX 8R(B)
When the CL is in the initial state, the output ports (jacks/ports) are patched to the following
output channels.
Output port (jack/port)
DANTE1-24 MIX 1-24
DANTE25-32 MATRIX1-8
DANTE33-34 STEREO L/R
DANTE35 MONO
DANTE36-37 MONITOR L/R
DANTE38
MONITOR C
DANTE39-40 CUE L/R
DANTE41-64 NO ASSIGN
SLOT1 (1)-(16) MIX1-16
SLOT2 (1)-(8) MIX17-24
Input port (jack/port)
Input port (jack/port)
Input port (jack/port)
Output channels
Output port (jack/port)
SLOT2 (9)-(16)
SLOT3 (1)-(2)
SLOT3(3)
SLOT3 (4)-(5)
SLOT3(6)
SLOT3 (7)-(8)
SLOT3 (9)-(16)
OMNI OUT 1 - OMNI OUT 6
OMNI OUT 7 - OMNI OUT 8
FX1L(A), FX2L(A), FX3L(A),
FX4L(A), FX5L(A), FX6L(A),
FX7L(A), FX8L(A)
DIGITAL OUT L/R
RECORDER INPUT L/R
CL console internal patching and Dante audio
network patching
The following diagram shows the signal flow through the CL series console, I/O devices, and
Dante audio network.
I/O Device
ID #3
Dante-MY16-AUD
OMNI MY MY MY
8 16 16 16
INPUT PATCH
CL series
16
Input and output patching
Output channels
MATRIX1-8
STEREO L/R
MONO
MONITOR L/R
MONITOR C
CUE L/R
NO ASSIGN
MIX 1-6
STEREO L/R
MIX17, MIX18, MIX19, MIX20, MIX21, MIX22, MIX23,
MIX24
STEREO L/R
STEREO L/R
I/O Device
ID #1
Dante Network
Up to 512 channels
I/O Device
(logical value)
ID #2
SW
64/512
patching
"Dante" (ports)
64
CL series
internal
patching
Dante
Reference Manual