Ftg Mode - LG 43LX770M Commercial Mode Setup Manual

Installer Menu
To create a Master TV Setup, you will need to know how to access
the commercial controller (PTC) Installer Menu and make changes to
the default values as required. If necessary, familiarize yourself with
the Installer Menu and how to make and save changes. Refer to
pages 36 to 46 for information on accessing the Installer Menu and
for detailed descriptions of the Installer Menu items.
TV Setup Menus
On-screen setup menus control the features of the TV. Use the
Installer Remote to access the TV setup menus, and set the TV
features to the desired configuration for the end user.
Cloning
Cloning refers to the process of using a Master TV Setup to configure
a Target TV. The Master TV's clonable setup menu features should be
configured as part of the Master TV Setup. If there are features in
the Master TV's setup—channel icons or labels, digital font options,
etc.—that are not set or that are set incorrectly, those features also
will not be set or will be set incorrectly in the Target TVs. Refer to
pages 50 to 56 for detailed information on cloning requirements and
procedures.
External MPI Control
To control the TV using an external MPI control device, you must
use the TV's GAME CONTROL/MPI port for communication purposes.
In these TVs, Installer Menu item 118 POWER SAVINGS controls the
power circuitry for both the embedded b-LAN module and the GAME
CONTROL/MPI port; therefore, to ensure that the GAME CONTROL/
MPI port circuitry is powered, thus enabling MPI communication,
Installer Menu item 118 POWER SAVINGS must be set appropriately.
See Installer Menu item descriptions as well as Reference section,
"b-LAN Setup & Overview," for further information.
Note: These TV models are not equipped with MPI card slots.

FTG Mode

In this mode, an FTG Channel Map enables the decryption of each
®
Pro:Idiom encrypted channel. The FTG Channel Map also provides
logical channel mapping of physical RF channels (digital and analog),
IP channels, and Aux inputs. The method for creating the FTG
Channel Map is ultimately determined by which element of the TV
will "own" the FTG Channel Map—the CPU or the EBL.
For these TV models, there are two FTG Modes—FTG Mode via CPU
and FTG Mode via EBL—which are separate and distinct FTG Modes
of operation, each with its own unique advantages and requirements,
as outlined on the following page.
206-4292 Draft A.2
Commercial Mode Overview (Cont.)
PTC INSTALLER MENU
xxLX770M
CPU - CTV
000 INSTALLER SEQ 000
UPN 000-000-000-000 ASIC D279
PTC V1.00.016 CPU V3.70.60.01
Typical Installer Menu
TV Setup Menus (Quick Settings)
PICTURE PICTURE
Picture
Sound
Smart Picture Mode
^
Off
Channels Picture Mode Settings
Aspect Ratio
General
16:9
3D Settings
Picture Test
Safety
3D Picture Test
Accessibility HDMI ULTRA HD Deep Color
TV Setup Menus (Advanced Settings)
7