Express Script; Initiate The Express Script; Configure Pro:centric Settings - LG 43LX770M Commercial Mode Setup Manual

Initiate the Express Script

Note: While the Express Script enables you to set up TVs individually in lieu of cloning, you can
also use the resulting Express Script TV Setup for cloning purposes, if desired (see "Exporting a
Clone File" on pages 50 to 52 for further information). However, note that TV setup menu custom-
ization via the Express Script is limited to Channels Menu options.
After you select the "Express Script" option from the Setup Wizard Welcome screen, an Express
Script Welcome screen provides a brief introduction to the Express Script.
WELCOME TO THE EXPRESS SCRIPT
.
Use the Express Script to confi gure the TV for Free-To-Guest (FTG) via CPU operation (including pillow
speaker setup). If a Pro:Centric server is installed, the Express Script also enables you to confi gure the
Pro:Centric settings on the TV.
Select NEXT to continue.
.
If you do not wish to use the Express Script to confi gure this TV, you may exit the wizard.
Select EXIT to quit.
From the Express Script Welcome screen, you have the following options:
• To proceed with the Express Script, use the Left/Right arrow keys on the Installer Remote to
select NEXT. Then, press OK on the Installer Remote.
Note: Select this option even if you only intend to confi gure the Pro:Centric settings on this TV.
After you confi gure the Pro:Centric settings, you will have the option to exit without completing
the remainder of the wizard, if desired.
• To exit the Express Script without completing any confi guration, use the Left/Right arrow keys
on the Installer Remote to select EXIT, and then press OK. In the confi rmation pop-up window,
select OK, and then press OK once more on the Installer Remote.
Confi gure Pro:Centric Settings
The next screen enables you to set up the Pro:Centric feature of the TV (see screen examples
on following page). By default, the Data Channel is confi gured for Auto Search, which enables
the TV's Data Channel Auto Search feature to set the Data Channel value. See item 119 DATA
CHANNEL description on page 46 for further information on the Data Channel Auto Search
feature. The Pro:Centric Application Mode default setting is "Confi guration Only," which enables
remote management only. That is, the TV will search for TV E-Z Installation data downloads;
however, Pro:Centric application data will not be downloaded, i.e., Installer Menu item 098
PRO:CENTRIC will be set to 0.
206-4292 Draft A.2
EXIT NEXT

Express Script

(Continued on next page)
23