Table of Contents
Advertisement
Installer Menu
To create a Master TV Setup, you will need to know how to access
the commercial controller (PTC) Installer Menu and make changes to
the default values as required. If necessary, familiarize yourself with
the Installer Menu and how to make and save changes. See pages 35
to 45 for information on accessing the Installer Menu and for detailed
descriptions of the Installer Menu items.
TV Setup Menus
On-screen setup menus control the features of the TV. Use the
Installer Remote to access the TV setup menus, and set the TV
features to the desired configuration for the end user.
Cloning
Cloning refers to the process of using a Master TV Setup to configure
a Target TV. The Master TV's clonable setup menu features should
be configured as part of the Master TV Setup. If there are features in
the Master TV's setup—channel icons or labels, digital font options,
etc.—that are not set or that are set incorrectly, those features also
will not be set or will be set incorrectly in the Target TVs. See pages
49 to 54 for detailed information on Clone (.tlx) files and cloning
requirements and procedures.
External Control
To control the TV using an external MPI control device, you must
use the TV's MPI port for communication purposes.
To control the TV using an external TLT control device, you must use
the TV's RS-232C port for communication purposes. See Reference
section, "TLT Communication Parameters," for further information.
FTG Mode
In this mode, the TV's CPU is configured with an FTG Channel Map,
and the CPU controls and restricts the tuning operation of the TV
based on this FTG Channel Map. The FTG Channel Map enables the
decryption of each Pro:Idiom
logical channel mapping of physical RF channels (digital and analog),
and Aux inputs. In addition, in these models, FTG Mode provides the
option to select either logical or physical tuning (see note below)
during configuration.
Note: Logical channel mapping of physical RF channels eliminates
dash tuning; for example, physical 19-3 can be mapped to logical
channel 9. It also allows physical RF channels and Aux inputs to
be listed in any order, not only in physical numeric ascending order.
Physical channel tuning requires that you include the dash when direct
entering RF channel numbers and Aux inputs (the latter designated
by 130-0 through 137-0).
206-4351
®
encrypted channel and also provides
Commercial Mode Overview (Cont.)
PTC INSTALLER MENU
xxUT567H
CPU - CTV
000 INSTALLER SEQ
000
UPN 000-000-000-000
S3 ##.## 7F78
PTC V#.##.###
CPU V#.##.##.##
Typical Installer Menu
X
TV Setup Menus (Quick Settings)
PICTURE
Picture
Sound
Picture Mode Settings
Channels
Aspect Ratio Settings
16:9
Additional Settings
General
Safety
Accessibility
TV Setup Menus (Advanced Settings)
7
Advertisement
Table of Contents
