Pro:centric Setup; Pro:centric Operation - LG 43LX770M Commercial Mode Setup Manual

Pro:Centric Setup

Administration and management options for the Pro:Centric server are described in detail in the
Pro:Centric Server Admin Client User Guide. This document describes only those settings that must
be specifi ed on the TVs to enable Pro:Centric remote management and/or the Pro:Centric application.
• Remote management (TV E-Z Installation): The Pro:Centric server Admin Client provides remote
management facilities for downloading splash screen image and software/firmware updates as well as
facilities for downloading a Clone/Confi guration (.tlx) file for FTG Mode via CPU configuration.
• Pro:Centric application: The application, which operates in conjunction with FTG and PPV Modes,
comprises the Pro:Centric interactive menus/features described on the previous page. Pro:Centric
application settings are managed via the Pro:Centric server Admin Client.
The Pro:Centric server settings can be confi gured using one of the methods described below.
Note: If using a Pro:Centric pillow speaker, also set Installer Menu item 027 HOSPITAL MODE to the
required value.
TV in Factory Default State
When the TV is in a factory default state, LG's Setup Wizard (see pages 12 to 13) provides automated or
manual options for confi guring the Pro:Centric server settings. The EZ-Manager branch of the Setup
Wizard also provides a USB confi guration option that enables you to confi gure a TV for FTG Mode via
CPU using a Clone/Confi guration (.tlx) fi le stored on a USB memory device. The ".tlx" fi le incorporates FTG
Installer Menu settings, including Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL, which
are used to set up the TV's Pro:Centric feature.
Note: If Pro:Centric data delivery will be over IP, there is a Domain Name System (DNS) server at the
site, and you intend to use the EZ-Manager Wizard to set up the TV, you can create a DNS entry
"procentric.local" for the Pro:Centric server that will enable automated Pro:Centric IP confi guration via the
EZ-Manager. If there is no DNS entry for procentric.local, you will need to manually enter the Pro:Centric
server IP address and port number during
TV in Pass-through Mode
If the TV is in Pass-through Mode, either:
• Set Installer Menu items 098 PRO:CENTRIC and 119 DATA CHANNEL to the appropriate values.
See Installer Menu information on pages 36 to 46 for further details. Also, as necessary, refer to "Custom
Master TV Setup" on pages 47 to 49 and/or cloning information on pages 50 to 56.
• Confi gure the appropriate Pro:Centric server settings in the IP Environment / Pro:Centric Menu. You must
use this option, in particular, if you wish to confi gure IP settings for the Pro:Centric server. See "Accessing
the IP Environment Menu" on page 63 and "Pro:Centric Setup" on pages 67 to 68 for further information.
Note: When the TV is in either Pass-through Mode or FTG Mode via CPU, you can also leave Installer
Menu item 119 DATA CHANNEL set to its default value (255) to enable the TV's Data Channel Auto Search
feature to set the DATA CHANNEL value. See item 119 description on page 46 for additional information.
TV in FTG Mode
If the TV is in FTG Mode (via CPU or EBL), use the appropriate FTG application software to update Installer
Menu items #98 Pro:Centric and #119 Data Channel (along with their affi liated fi elds). Then, transfer the
FTG Installer Menu settings to the TV in accordance with the FTG Mode of confi guration. Refer to the FTG
Mode overview on pages 7 to 9 for further information on FTG Mode operation and confi guration. Also—for
FTG Mode via CPU only—see note above regarding the option to use the TV's Data Channel Auto Search
feature to set the DATA CHANNEL value.
206-4292 Draft A.2
confi guration.
Pro:Centric Operation (Cont.)
11