LG 43LX770M Commercial Mode Setup Manual page 85

Using the Wi-Fi Zoning Feature with Cloning Confi guration
A location-specifi c Wi-Fi confi guration / Clone (.tlx) fi le may be saved (exported) from a Master TV and
then be used to confi gure Target TVs. First, the wireless network (i.e., the access point login data) must
be confi gured in the Master TV's IP Environment Menu (see "Confi guring a Wi-Fi Network Connection" on
page 65). Then, a Wi-Fi Zone # must be set in the Master TV (see "Set the TV Zone # and/or Wi-Fi Zone #
in the TV" below). If desired, a TV Zone # may also be set in the Master TV.
For example, if the Wi-Fi Zone # is set to 4 and the TV Zone # is set to 5 before the Clone fi le export is
initiated, the Master TV's Installer Menu profi le will be saved with the Zone 5 assignment, and within that
Installer Menu profi le, the access point login data for wireless networking (i.e., SSID, security type, and
security key) will be saved with a Wi-Fi Zone 4 assignment. In order to confi gure the Target TVs with the
proper Installer Menu profi le and access point login data, you must set both the TV Zone # and the Wi-Fi
Zone # in the Target TVs accordingly before importing the Clone fi le. See "Set the TV Zone # and/or Wi-Fi
Zone # in the TV" below. Also, see "Cloning Procedures" on pages 50 to 56 for additional information on
the cloning processes. If the Wi-Fi Zone # in the TV is set to 0 (default), the TV will not obtain access point
login data from the Installer Menu profi le with which it is confi gured unless the profi le contains the global
Wi-Fi Zone 100. Any TV that does not fi nd its matching Wi-Fi Zone # in the Clone fi le, but does fi nd the
global Wi-Fi Zone 100, will be confi gured with the global access point login data.
Set the TV Zone # and/or Wi-Fi Zone # in the TV
You can set the TV Zone # and/or the Wi-Fi Zone # in the EZ-Manager Wizard (see "EZ-Manager Wizard"
on pages 12 to 21) or, if the TV is in Pass-through Mode, via the TV's setup menus as described below.
Note that the following procedure can only be performed while the TV is in Pass-through Mode. You will also
be able to specify a Label (North, South, East, West) and Room Number for this TV, if desired.
1. Turn ON the TV.
2. Press MENU on the Installer Remote, and use the arrow navigation keys to select/highlight the
General menu icon. Then, press OK.
3. In the General Menu, use the Up/Down arrow keys to select Room Info, and then press OK.
4. In the Room Info screen, complete the appropriate fi elds as described below. Use the Up/Down arrow
keys on the Installer Remote to navigate between each of the fi elds.
• Wi-Fi Zone: Enables you to set a Wi-Fi Zone # so that the TV can be confi gured with a particular
access point's login data for wireless networking. Login data (i.e., SSID, security type, and security
key) may be provided in a Clone/Confi guration (.tlx) fi le.
To assign a Wi-Fi Zone, select/highlight the Wi-Fi Zone fi eld and press OK. Then, use the Left/Right
arrow keys to specify the desired Wi-Fi Zone # (1–99). Press OK when you are fi nished.
• TV Zone: Enables you to set a TV Zone # so that the TV can be confi gured with Installer Menu and/
or TV Setup Menu settings intended only for the assigned Zone. The Installer Menu and/or TV Setup
Menu settings may be provided in a Clone/Confi guration (.tlx) fi le. If the TV is being confi gured for FTG
Mode via CPU, the TV Zone # setting also allows the TV to omit channels that have been restricted
in the FTG Channel Map (see "FTG Channel Map Zone Restrictions" on page 83).
To change the TV Zone, select/highlight the TV Zone fi eld and press OK. Then, use the Left/Right
arrow keys to specify the desired TV Zone # (0–8). Press OK when you are fi nished.
206-4292 Draft A.2
Reference: Using the TV's Zoning Features (Cont.)
(Continued on next page)
85