LG 43LX770M Commercial Mode Setup Manual page 20

EZ-Manager Wizard (Cont.)
(Continued from previous page)
RF Confi guration
a) In the Media Type fi eld, use the Left/Right arrow keys to select RF.
b) In the Data Channel fi eld, use the Left/Right arrow keys to select the RF channel number
that will be used by the Pro:Centric server as its data channel. The Data Channel value can
be set from 1 to 135. *
IP Confi guration
a) In the Media Type fi eld, use the Left/Right arrow keys to select IP.
Note: When you select "IP" as the Media Type, the default RF Data Channel and Signal
Strength/Quality fi elds are replaced with IP Input Type, IP Address, and IP Port fi elds.
b) The IP Input Type fi eld provides the option to specify the domain name of the Pro:Centric
server instead of the server's IP address and port number. Use the Left/Right arrow keys to
select the desired option—NUMBER or DOMAIN—for defi ning the server.
c) Depending on your selection in the previous step, either:
• Enter the Pro:Centric server IP address and port number in the IP Address and IP Port
fi elds, respectively. The IP address must match the IPv4 multicast address and the port
number must match the port number that is set in the Pro:Centric server.
• Enter the Pro:Centric server domain name in the Domain Name fi eld. Note that in order
for the domain name to be resolved to an IP address, there must be a DNS entry for the
domain name.
For each data entry fi eld: Use the arrow keys to select the fi eld and press OK. Then, you
can either use the number keys on the Installer Remote to direct enter data values, or you
can use the arrow keys to select the appropriate number(s)/alphanumeric character(s) from
the pop-up virtual keyboard displayed at the bottom of the screen. When you are done, select
Enter from the virtual keyboard, and then press OK on the Installer Remote.
4. Once all fi elds are completed as required, you have two options:
• To save the data entered and exit the wizard, use the arrow keys to select EXIT and then press
OK. In the subsequent pop-up confi rmation window, select SAVE & EXIT, and then press OK
once more. The Pro:Centric application and/or E-Z Installation data will be downloaded to the
TV at a later time. This option is useful, in particular, if the Pro:Centric server has not yet been
confi gured.
• If you wish to initiate a real-time download of Pro:Centric application and/or E-Z Installation
data, use the arrow keys to select SEARCH and press OK to verify the confi guration data
provided in step 3. When the data is verifi ed, the "SEARCH" button becomes a "NEXT" button.
Select NEXT and press OK to continue (see also note below).
Note: With RF confi guration, Pro:Centric server data must be present on the RF channel
selected as the TV's Data Channel in order for you to select "NEXT" (you will see a "data
channel found" message below the Signal Quality indicator). With IP confi guration, Pro:Centric
server data must be present via the wired LAN cable connection in order for you to select
"NEXT" (you will see a "IP server found" message below the IP Port fi eld).
*
PCS150R and later Pro:Centric servers do not support HRC or IRC cable channel frequencies.
20
(Continued on next page)
206-4292 Draft A.2