Speaker Selection - LG 43LX770M Commercial Mode Setup Manual

(Continued from previous page)
Enabled Aux inputs are included in the channel lineup. If an Aux input will not be used, it is
typically advisable to disable it, though you may also simply delete it from the channel lineup
in step 6, if you want to leave it enabled in the Installer Menu.
Note: After the TV setup is complete (see step 7), the only way to add or remove Aux inputs
to/from the FTG Channel Map, is to edit the FTG Channel Map using the FTG Channel Map
Editor in the FTG File Manager. Refer to the Free-To-Guest (FTG) File Manager User Guide
for further information.
Note: Disabled Aux inputs are not included in the channel lineup. However, if you wish to
enable a disabled Aux input in the future, you may do so by changing the applicable Installer
Menu settings (see Installer Menu information in this document). See also note above.
3. Use the arrow keys on the Installer Remote to select the appropriate speaker confi guration:
• Highlight/select the desired speaker—Pillow Only (default), TV Only, or Pillow & TV. Then,
press OK.
• If applicable, select the pillow speaker code/voltage and press OK.
Note: If using a Pro:Centric pillow speaker (LG IR codes) or a pillow speaker with Zenith IR
codes, make sure the "Zenith" pillow speaker code (default) is selected.
When you have made your selection(s), use the arrow keys to select NEXT, and then press OK.

SPEAKER SELECTION

Select the desired speaker confi guration:
Pillow Only
TV Only
Pillow & TV
4. In the Channel Tuning screen, you have the option to initiate an automated channel scan that
will search for all available digital and analog channels. Select RUN AUTO TUNING and press
OK on the Installer Remote to start the channel scan.
Note: You MUST select RUN AUTO TUNING and press OK in order to run the
channel scan. If you move on to the next step without running Auto Tuning, there
will be no digital or analog channels in the channel lineup. In this case, upon
completion of the Express Script, the only channels in the resulting FTG Channel
Map will be any enabled Aux inputs.
206-4292 Draft A.2
Pillow Speaker Code/Voltage
Zenith (+12v)
Philips (+5v)
RCA (-5v)
BACK NEXT
EXIT
Express Script (Cont.)
04
(Continued on next page)
27