LG 43LX770M Commercial Mode Setup Manual page 65

(Continued from previous page)
If the network is connected successfully, a "Connected to Internet" message will appear just
below the progress display. If the network connection is not successful, the progress display will
identify the network element in which the connection failed. Check your cabling and/or verify the
confi guration data, as necessary.
4. Once the wired network confi guration is complete, use the arrow keys on the Installer Remote to
return to the IP Environment Menu, as necessary, or press
Menu level(s) and/or exit the IP Environment Menu.
Confi guring a Wi-Fi Network Connection
1. With the Network Menu on display, use the arrow keys on the
Installer Remote to select Network Setting. Then, press OK.
2. A second Network screen (see example at right), with Wired and
Wi-Fi Connection setup options, will be displayed. Select Wi-Fi
Connection and press OK.
3. In the Wi-Fi screen, available access points are listed in the top
half, while additional menu options are listed in the bottom half, of
the screen. Use the arrow keys on the Installer Remote to select the
desired access point, or select the type of wireless connection to
confi gure (see descriptions below). Then, press OK.
• Add a hidden wireless network: Direct enter the SSID of an
access point whose SSID has not been enabled for broadcast
(i.e., the access point does not appear in the list of access points).
• WPS PBC: Connect to a network via an access point that
is enabled for PBC.
• WPS PIN: Complete network/PIN verifi cation via the access
point web interface.
Make sure you have the network security password/PIN available
if you are attempting to connect to a secured network.
4. Follow the on-screen instructions to complete the appropriate
network confi guration. Use the Installer Remote to navigate
between fi elds and make entries, etc.
Note: As with a wired connection, you will have the option to specify
the IP confi guration for this network connection. Once the initial
connection is established, you can select Advanced Settings
(initially greyed out) at the bottom of the Wi-Fi screen to view the IP
confi guration data. In the Advanced screen, select Edit and press
OK, and then modify the IP data, as required. See step 3 of the
wired connection procedure above for further information on the Edit
IP screen fi elds.
5. Once the wireless network confi guration is complete, use the arrow
keys on the Installer Remote to return to the IP Environment Menu,
as necessary, or press
level(s) and/or exit the IP Environment Menu.
206-4292 Draft A.2
to return to the previous Network Menu
IP Environment Setup (Cont.)
to return to the previous Network
Network
Pro:Centric
Media Share
Pre-loaded
Network
Pro:Centric
Media Share
Pre-loaded
NETWORK SETTING NETWORK SETTING
Wired Connection (Ethernet)
Not Connected
Wi-Fi Connection
Not Connected
Apps
WI WI-FI FI
Network / Network Setting / Network / Network Setting /
AAA
BBB
CCC
DDD
Apps
EEE
FFF
Add a hidden wireless network
Connect via WPS PBC
Connect via WPS PIN
Advanced settings
65