Using Media Share Features - LG 43LX770M Commercial Mode Setup Manual

Reference: Using Media Share Features (Cont.)
SoftAP
The following steps describe how to access and use the SoftAP feature.
1. Turn ON the TV, and press MENU on the Installer Remote to display the TV menus (either the setup
menus or the Function Menu depending on whether the TV is or is not in Pass-through Mode).
2. Use the Up/Down arrow keys to select/highlight the General menu icon, and then press OK.
3. In the General Menu, use the Up/Down arrow keys to select SoftAP, and then press OK.
GENERAL GENERAL
Picture
Sound
Language
Room Info
Channels
Time & Date
Timers
General
SoftAP
Standby Light ^
On
Safety
Home/Store Mode
Set ID
^
Accessibility
1
SIMPLINK
Eject
Note: If SoftAP is currently grayed out, make sure a wired LAN connection has been established.
4. When you initially access the SoftAP screen, the OFF/ON toggle button at the top right of the screen
is selected/highlighted by default. If SoftAP is currently OFF, press OK on the Installer Remote to turn
SoftAP ON. When SoftAP is ON, the SoftAP access information, including the SSID and security key, is
displayed in the lower half of the screen.
5. Make sure Wi-Fi is turned ON on your device, and then look for the TV's SSID in the list of available
Wi-Fi networks. Initiate the connection, and enter the security key as requested.
Once a device is connected successfully to the TV's network, you can use it to access the Internet. Up
to fi ve devices may be connected at a time; the Number of Connected Devices fi eld in the SoftAP screen
shows the number of devices currently connected to the TV Wi-Fi access point.
Note: A wired network connection MUST be established in order for guests to use SoftAP. Also, the SoftAP
feature may only be used while the TV is turned ON.
Note: If the Wi-Fi frequency is not automatically detected, set the frequency in the device(s) to 2.4 GHz.
90
SOFTAP SOFTAP
Picture
General General / /
Sound
SoftAP enables the TV to act as a wireless access point to
provide Internet access for up to fi ve Wi-Fi devices.
Channels
Note: A wired network connection MUST be established
and the TV must be turned ON.
SoftAP Access Information
General
SSID
410KKTF1J505
Safety
Security Key
LGxxxxxx
Number of Connected Devices
Accessibility
0
ON
Note: The example at left
shows the General Menu when
the TV is in Pass-through Mode.
The SoftAP screen is the same
whether the TV is or is not in
Pass-through Mode.
206-4292 Draft A.2