LG 43LX770M Commercial Mode Setup Manual page 53

• Avoid using special characters, such as ?, &, @, etc., in the Clone/Confi guration (.tlx) fi lename.
• If you have initiated the EZ-Manager Wizard, you can use the wizard's "USB Confi guration" option
to access the TV Manager and complete the import procedure, if desired (see "TV Confi guration
Options" and/or "USB Confi guration" on pages 15 and 21, respectively, as necessary).
• You may also use the Ez Download utility to import the Clone/Confi guration (.tlx) fi le. See "Ez
Download Utility" on pages 32 to 35 for further information.
• If the Target TV is currently in Pass-through Mode and you intend to use the TV's Zoning
feature(s)—i.e., the Clone/Confi guration (.tlx) fi le you are importing contains an FTG Channel
Map and/or FTG profi le(s) with TV Zone and/or Wi-Fi Zone assignments—make sure to assign
the appropriate TV Zone # and/or Wi-Fi Zone # in the TV when directed to do so in the procedure
below. See Reference section, "Using the TV's Zoning Features," for further information.
• If you would like the Target TV(s) to remain in Pass-through Mode after the Clone/Confi guration
(.tlx) fi le is imported, ensure the ".tlx" fi le does not contain an FTG Channel Map; otherwise, the
import procedure will result in the Target TV(s) being confi gured for FTG Mode via CPU.
• If a Clone (.tlx) fi le (exported Master TV Setup) contains an FTG Channel Map, the physical RF
channels in the FTG Channel Map have been assigned logical channel numbers (see "Exporting
a Clone File" above). When you import the Clone fi le with the FTG Channel Map on the Target
TV(s), you will have the option to select either logical or physical channel tuning. Even if you
select physical channel tuning, the (list of) physical RF channels in the FTG Channel Map will
remain in logical order.
• If an FTG Confi guration (.tlx) fi le (created in the FTG File Manager) contains an FTG Channel
Map, each logical channel number in the FTG Channel Map has been assigned a physical RF
channel, an IP channel, or an Aux input (the latter designated by 130-0 through 137-0—see also
Reference section, "TV Aux Input Confi guration").
Note: If the FTG Channel Map includes RF channels and Aux inputs only, when you import
the FTG Confi guration fi le on the Target TV(s), you will have the option to select either logical or
physical channel tuning. If you select physical channel tuning, the physical RF channels and
Aux inputs in the FTG Channel Map will remain in logical order. Physical channel tuning is not
available when the FTG Channel Map includes IP channels.
• If the Target TV EBL is already in FTG Mode, you cannot use this procedure to make changes
to the FTG Channel Map and FTG Installer Menu settings. You must use a direct PC-to-TV
connection as described in Reference section, "FTG Mode via EBL (Local Confi guration)," or an
FMA head end device to reconfi gure the EBL.
• If the preceding condition applies, but you wish to switch the TV to FTG Mode via CPU, see
Reference section, "Restoring Factory Defaults on the TV(s)," for further information before
proceeding.
• If the Clone/Confi guration (.tlx) fi le was edited/created in the FTG File Manager, it may contain
multiple zoned FTG Installer Menu profi les for different TV models. Make sure it includes the
appropriate Installer Menu profi le(s) for the Target TV(s) before performing the procedure below.
Caution: Do not unplug the TV power cord or remove the USB memory device while
importing is in progress, as doing so may cause the TV to malfunction or harm the
USB device, respectively.
206-4292 Draft A.2
Cloning Procedures (Cont.)
53