LG 43LX770M Commercial Mode Setup Manual page 66

IP Environment Setup (Cont.)
IP Stream Control
If necessary, due to an audio and/or video stream delay, IP Stream
Control options enable you to compensate for synchronization
irregularities by allowing audio PTS and video PTS offset modifi cations.
This menu also enables you to specify the IGMP version (2 or 3). Note
that any modifi cations to these settings should be performed by
qualifi ed personnel only.
1. With the Network Menu on display, use the arrow keys on the
Installer Remote to select IP Stream Control. Then, press OK.
2. In the IP Stream Control screen, use the Up/Down arrow keys on
the Installer Remote to select/highlight the appropriate fi eld—Audio
PTS Offset, Video PTS Offset, or IGMP Version—and then press
OK.
3. If you are modifying an offset value, use the Left/Right arrow keys
to select the appropriate value for the selected fi eld. Offset values
represent offset time in milliseconds (ms) and can be adjusted
from -500 ms to +500 ms in 10 ms increments. When you are
done, press OK on the Installer Remote.
If you are modifying the IGMP version, use the Up/Down arrow
keys to select the appropriate version number and press OK.
4. Once all modifi cations are completed as required, use the arrow
keys on the Installer Remote to return to the IP Environment Menu,
as necessary, or press
the IP Environment Menu.
Wake On LAN Setup
The Wake On LAN feature enables the TV to receive software
updates and/or be powered ON upon receipt of Wake Up Frame
packets and/or Magic Packet data via the wired LAN. To facilitate
use of this feature, note that the appropriate wired connection must
be made. This menu option enables you to specify Wake On LAN
parameters.
1. With the Network Menu on display, use the arrow keys on the
Installer Remote to select Wake On LAN. Then, press OK.
2. In the Wake On LAN screen, use the Up/Down arrow keys on the
Installer Remote to select/highlight the desired fi eld and press OK.
Then, use the arrow keys to select the desired setting—Disabled,
Update, or Power On—from the drop-down list of options.
3. Once all fi elds are completed as required, use the arrow keys on
the Installer Remote to return to the IP Environment Menu, as
necessary, or press
IP Environment Menu.
66
to return to the Network Menu and/or exit
to return to the Network Menu and/or exit the
IP STREAM CONTROL IP STREAM CONTROL
Network
Pro:Centric
Audio PTS Off set ^
0
Video PTS Off set ^
Media Share
0
IGMP ^
Pre-loaded 2
Apps
WAKE ON LAN WAKE ON LAN
Network
Pro:Centric
^
WOL (Wake Up Frame)
Disabled
WOL (Magic Packet) ^
Media Share
Disabled
Pre-loaded
Apps
206-4292 Draft A.2