Lg Setup Wizard; Before You Begin - LG 43LX770M Commercial Mode Setup Manual

LG Setup Wizard

Note: After it is turned ON, the TV begins an initialization process, and it may take several minutes
for the LG Setup Wizard to appear.
The LG Setup Wizard, comprising EZ-Manager Wizard and Express Script configuration options,
will appear on the screen each time the TV is turned ON, until one of its configuration methods
has been completed or the wizard is exited. Use the Installer Remote to make selections and
complete each step.
• The primary purpose of the EZ-Manager Wizard is to guide you through the process (automated
or manual) of confi guring the essential Installer Menu items for Pro:Centric operation. However,
while intended primarily for Pro:Centric-related confi guration, the EZ-Manager Wizard also offers
Zoning options. LY770M TVs support the TV Zoning and Wi-Fi Zoning features, both of which
enable location-specifi c settings (see Reference section, "Using the TV's Zoning Features," for
further information). The EZ-Manager Wizard enables you to set the TV Zone # and/or the Wi-Fi
Zone # in the TV as part of the confi guration process.
• The EZ-Manager Wizard also enables you to access USB download options as part of the
confi guration process, if desired, to perform USB confi guration and/or update functions.
• The Express Script guides you through the process of confi guring the TV for FTG Mode via
CPU operation. This includes setting up the pillow speaker, as required. The Express Script also
enables you to confi gure the Pro:Centric settings on the TV. Note that the Express Script uses
the TV's standard RF Auto Tuning feature to create the TV's channel lineup; IP channels are not
supported.
Caution: Do NOT unplug the TV power cord or remove the antenna cable or, if
applicable, the LAN cable during the confi guration process, as doing so will interrupt
the current step and may corrupt the confi guration data.
Note: If you do not intend to complete the Express Script, but you wish to enable
pillow speaker functionality, you must set Installer Menu item 027 HOSPITAL MODE
appropriately. See the "Installer Menu" section of this document for further information.

Before You Begin

• If you plan to create a customized Master TV Setup using the procedure described on pages 46 to
48, be sure to exit the LG Setup Wizard in order to avoid setup confl icts or setting modes that may
cause the TV to malfunction or restrict the custom setup procedure. See also "Initiate Confi guration
or Exit the LG Setup Wizard" on the following page.
• If it has been completed or exited and therefore does not display, the Setup Wizard can be
reactivated; however, this requires that you restore the TV to a factory default condition. See
Reference section, "Restoring Factory Defaults on the TV(s)," for further information.
• If you would like to enable the SoftAP and DIAL Media Share features on a TV that will
eventually be confi gured for FTG Mode, you will need to use the IP Environment Menu to do so
before the TV is confi gured for FTG Mode. Refer to "IP Environment Setup" on pages 65 to 72
for information on the IP Environment Menu. See also "Custom Master TV Setup" on pages 47
to 49.
12
206-4292 Draft A.2