Installer Menu; Accessing The Installer Menu - LG 43LX770M Commercial Mode Setup Manual

Installer Menu

Use the Installer Menu to set up, change, or view operational settings. This section describes how
to access, use, and exit the Installer Menu from the TV itself. However, you should also refer to the
Installer Menu descriptions in this document if you are confi guring the TV CPU using an FTG
Confi guration (.tlx) fi le created using LG's FTG File Manager software or confi guring the EBL locally
(.rml) or remotely (via FMA-LG101 / .fma) using the FTG Device Confi guration Application software.
Refer to the table on pages 38 to 40 for brief descriptions of Installer Menu items. More detailed
descriptions follow the table listing.

Accessing the Installer Menu

1. Turn ON the TV.
If the EZ-Manager Wizard appears on the screen when you turn ON the TV, exit the wizard.
2. Using an Installer Remote, press MENU repeatedly until the on-screen display of the TV setup
menus (if the TV is in Pass-through Mode) or the Function Menu (if the TV is not in Pass-through
Mode) no longer toggles, and then press the Installer Menu entry sequence (e.g., 9-8-7-6) + OK
to access the Installer Menu.
Note: The default Installer Menu entry sequence is "9876"; however, if Installer Menu item 000
INSTALLER SEQUENCE has been modifi ed, the entry sequence may be one of three additional
options. See Installer Menu detailed descriptions for further information.
The Installer Menu opens with item 000 INSTALLER SEQ 000.
PTC INSTALLER MENU
xxLX770M
000 INSTALLER SEQ
UPN 000-000-000-000
PTC V1.00.016
PTC Version
Note: If the password (entry sequence) is not entered or registered correctly, you will see the
message "ENTER PASSWORD 0000" at the top of the screen instead of the Installer Menu
header. Once you re-enter the correct password (e.g., press 9-8-7-6 + OK), the Installer Menu will
display.
Note: If the TV is not in Pass-through Mode, the Installer Menu is accessible as read-only. Also,
the TV Zone # will be indicated in the Installer Menu header under the confi guration mode indicator
described below.
36
CPU - CTV
000
ASIC D279
CPU V3.70.60.01
CPU Version
Typical Installer Menu
The Installer Menu header will vary
depending on the TV you are setting
up. In the Installer Menu footer, you
can see the current software versions
of the TV, as indicated.
206-4292 Draft A.2