LG 43LX770M Commercial Mode Setup Manual page 29

(Continued from previous page)
Use the arrow keys to navigate between the fi elds in this screen:
• Channel/Input: Edit the channel lineup, as necessary. Use the Left/Right arrow keys on the
Installer Remote to select channels (including Aux inputs), and press OK to delete (or re-add)
channels per the installation site requirements.
Note: When a channel is active in the channel lineup (i.e., added), all additional fi elds in this
screen are selectable/available. If a channel is deleted, all other fi elds in this screen become
inaccessible (grayed out).
• Channel Label: Press OK to display the pop-up virtual alphanumeric keyboard, and add a
custom text label for each channel/Aux input (up to 17 characters), as desired.
• Channel Icon: This fi eld enables you to select the appropriate trademark/icon for each
channel's Channel-Time on-screen display. If known, you can direct enter the icon number
using the number keys on the Installer Remote. Otherwise, use the arrow keys on the Installer
Remote to select/highlight either the left (<) or right (>) arrow in the Channel Icon fi eld, and
press OK until the desired logo is shown. Icons are available for familiar channels, such as
ABC, CBS, NBC, etc. Identifi able icons should enable the end user to readily know what
common networks are available.
• Channel Banks: Use the arrow keys to defi ne channel banks, as desired. See "Channel
Banks Overview" on following page for additional information.
When you are fi nished, use the arrow keys to select NEXT, and then press OK.
6. In the next screen, select the format for the channel tuning/channer banner display.
If logical channel tuning (default) is appropriate for the installation site, you can simply select
Next and press OK. Otherwise, use the Up/Down arrow keys on the Installer Remote to select
the channel tuning/channer banner fi eld, and then use the Left/Right arrow keys on the Installer
Remote to select "Physical" for the channel tuning/channel banner display format. When you
have made your selection, use the arrow keys to select Next, and then press OK.
CHANNEL TUNING/CHANNER BANNER
Select the desired channel tuning/channel banner display format:
Logical
Physical
206-4292 Draft A.2
BACK NEXT
EXIT
Express Script (Cont.)
07
(Continued on next page)
29