Analog; Default Settings - Nellcor N-395 Operator's Manual

Press the NEXT softkey to access the LANG softkey. After
pressing the LANG softkey, use the ADJUST UPIDOWN
Buttons to select English, French, German, Italian, Spanish,
Dutch, or Portuguese.
If the language is changed and EXIT is pressed (or a 10-second
tiineout occurs), the monitor begins displaying data in the
selected language.
MCALL
The NCALL softkey provides the capability of setting the alarm
voltage at a normally high (NORM +) or normally low
(NORM -). Refer to the "Nurse Call" heading of Data Port
Protocol for a more thorough explanation of these settings. The
nurse call feature is also discussed later in this section.
ANALOG
The ANALOG softkey provides the capability to produce
variable calibrating voltages to calibrate instruinents such as a
chart recorder. Refer to the "Analog Outputs" heading of Data
Port Protocol for a more thorough explanation of these settings.
The LIGHT softkey turns the backlight on or off. When the
backlight is off, pressing any softkey turns the backlight on.
Also, the CONTRAST and ALARM SILENCE keys will turn
the backlight on. Any alarin will turn the backlight on. Turning
the backlight off conserves battery power.
Default Settings
The N-395 is shipped with factory default settings (Table 6 and
Table 7). Authorized technical personnel using the procedures
described in the N-395 service manual can change default
settings.
Note: Factory default settings are constaiits that cannot be
changed without re-comnpiling software.