Description Of Conzrols; Function Buttons - Nellcor N-395 Operator's Manual

DESCRIPTION OF CONTROLS
Function Buttons
The Power 0id0ff Button. Used to turn the 74-395
monitor on or off.
The ALARM SILENCE Button. Used to silence
current alarms for the alarm silence duration period.
When an alarm has been silenced, pressing the
button again reactivates, or "unsilences," the alarin.
It is also used to view and adjust alarm silence
duration and alarm volume. The ALARM
SILENCE button clears "Sensor Off' and 66Sei~sor
Disconnect" messages from the display.
The ADJUST UP Button. Used to increase alarm
limit values, alarin silence duration, pulse beep
voluine, alarin volume, contrast, date and time
values, data port baud rate, and to move the cursor
to the right (in the trend view).
The ADJUST DOWN Button. Used to decrease
alarm limit values, alarin silence duration, pulse
beep volume, alarm volume, contrast, date and time
values, data port baud rate, and to move the cursor
to the left (in the trend view).
The CONTRAST Button. Used in conjunction with
the ADJUST UPiDOWN Buttons to lighten or
darken the display screen.
.,..e.r
.
>
, ,
.<?:,
5:%@,14&bg@::,
$qh>&s?&s,>*:*$:%<.
8,
&21$T;:<*ff~s<$$~~:.y
The softkey buttons have multiple uses depending
.i~~&:,,y&;:~s&~:~~;&
,$v vw.,F
?,..
.. ..
on the legend displayed above the button.