Setup [02] - Siemens SIPART PS100 Operating Instructions Manual

8.3

SETUP [02]

Setting the device parameters.
Factory-set parameter values are printed in bold in the table.
③ ①
01 DIGITAL IN
01
• BEHAVIOR DI
02
• POLARITY DI
02 DIGITAL OUT
01
• BEHAVIOR DO
02
• POLARITY DO
03
• DO POS LIMIT
03 DIRECTION
SIPART PS100
Operating Instructions, 06/2023, A5E50188938-AF
②
Meaning
Digital input (DI)
MENU Menu for setting the digital input (DI)
Behavior at digital input
NONE Sets the digital input to inactive.
HOLD Sets the digital input to keep the valve position.
BUTTN Sets the digital input to button lock.
MSG Enables the digital output.
GO CL Moves to the valve position when digital input is activated, as set in
parameter "CLOSE LIMIT" [05].
GO OL Moves to the valve position when digital input is activated, as set in
parameter "OPEN LIMIT" [07].
Polarity of the digital input
HIGH Normally Open: Normally open contact
LOW Normally Close: Normally closed contact
Digital output (DO)
MENU Menu for setting the digital output (DO)
Behavior at digital output
NONE Sets the digital output to inactive.
ERR Enables the digital output in case of control deviation or device error.
ERR M Enables the digital output in case of manual operation, control devi‐
ation or device error.
POS Enables the digital output when the value of the "DO POS LIMIT" [03]
parameter is reached.
Polarity of the digital output
HIGH Normally Open: Normally open contact
LOW Normally Close: Normally closed contact
0.0 ... 10.0 ... Specifies the value as a percentage at which the digital output is en‐
100.0 abled. Values < 50 correspond to a low limit value. Values ≥ 50 corre‐
spond to a high limit value.
AUTO Sets the operating direction of the valve defined during initialization.
INVRT Inverts the operating direction of the valve defined during initializa‐
tion.
Parameter assignment and addressing
8.3 SETUP [02]
45