Swimming Pool - Viessmann VITOCAL 300-A Installation And Service Instructions Manual

Temperature differential heating
A Set room temperature
B Outside temperature
C Selected value "Temp. diff. heat-
ing"
D Heating OFF
E Heating ON

Swimming pool

If swimming pool heating is required,
parameter "Swimming pool" must be
set.
Note
Parameter "Ext. extension" must be
set to "Yes" (see page 135), or menu
item "Swimming pool" is not shown
on the display.
Press the following keys:
1. "Device settings".
System definition control settings
(cont.)
Press the following keys:
1. "Device settings".
2. "Programming".
3. "System definition".
4. y/x for "Temp. diff. heat-
ing" (7003).
5. 5/% for the selected value.
6. "BACK" to confirm.
Delivered condition
Setting range
2. "Programming".
3. "System definition".
4. y/x for "Swimming pool"
(7008).
5. "YES" to enable.
6. "BACK" to confirm.
4 K
0 to 20 K
133