Canceling A Transmission - Ricoh M C251FW User Manual

6. Sending and Receiving a Fax
• When in Memory Transmission mode, the machine's memory may become full while scanning the
originals. In this case, the screen prompts you to cancel the transmission or to send only the pages
that have been scanned successfully.
• You can scan 2-sided originals from the ADF in Memory Transmission mode. Specify how to scan
2-sided originals in the [Fax Original] setting under [Transmission Setting]. For [Fax Original], see
page 225 "Fax Settings".
• If paper is jammed in the ADF, the jammed page has not been scanned properly. When the
machine is in Immediate Transmission mode, resend the fax starting from the jammed page. When
in Memory Transmission mode, scan the entire originals again. For details about removing paper
jammed in the ADF, see page 357 "Removing Paper Jams".
• The machine can store up to 5 unsent fax jobs.

Canceling a Transmission

This section explains how to cancel a fax transmission.
Canceling a transmission before the original is scanned
Use this procedure to cancel a transmission before pressing the [B&W Start] key.
1. Press the [Clear/Stop] key.
Canceling a transmission while the original is being scanned
Use this procedure to cancel scanning or transmitting of the original while it is being scanned.
184
ECC203