4. Fax
Canceling a Transmission
This section explains how to cancel a fax transmission.
Canceling a Transmission Before the Original Is Scanned
1.
Press [Reset] on the top right of the screen.
Canceling a Transmission While the Original Is Being Scanned
Use this procedure to cancel scanning or transmitting of the original while it is being scanned.
If you cancel a transmission using the standard memory transmission function, you need to follow a
different procedure to cancel the transmission. See page 72 "Canceling a Transmission after the
Original Is Scanned".
1.
Press [Stop].
2.
Press [Cancel].
Depending on the transmission mode and function you use, either [Cancel Scanning] or [Cancel
TX] is displayed.
• Scanning may be completed while you are performing the cancel operation.
Canceling a Transmission after the Original Is Scanned
Use this procedure to cancel a transmission after the original is scanned.
You can cancel transmission of a file while the file is being sent or stored in memory.
1.
Press [Job Status].
2.
Press [Transmission Standby File].
3.
Select [File List] or [Files under Transmission].
4.
Select the file you want to cancel.
5.
Press [Cancel].
6.
Press [OK].
To cancel another file, repeat Steps 4 to 6.
72