Fuji Xerox DocuScan C4250A Setup And Quick Reference Manual page 95

Feature
4 Color Balance
(available only
when the scanner is
connected to a color
printer)
• If you change the
settings on [Color
Balance] screen
after configuring
them on the
[Image Quality
Presets] screen,
the settings
configured on the
[Image Quality
Presets] screen
will become
invalid.
• When [Output
Color] is set to
[Black], this
setting only
applies to black.
5 Sharpness
6 Color Saturation
(available only
when the scanner is
connected to a color
printer)
• This feature is
available only
when [Output
Color] is set to
[Full Color].
• Yellow Displays the [Color Balance] screen.
• Magenta On this screen, you can adjust the levels of four process colors (yellow,
• Cyan magenta, cyan, and black). The color balance can be adjusted in seven
• Black levels for area of low, medium, and high density.
Select a color to display the setting screen for that color. The color
balance can be adjusted for [Low Density], [Mid. Density], and [High
Density] using [
• 5 levels of Displays the [Sharpness] screen. The sharpness can be adjusted using
adjustment from
[
[Sharper] to [Softer]
The closer the level is to [Sharper], the sharper the contour of the
image. The closer the level is to [Softer], the softer the contour of the
image.
• 5 levels of Displays the [Color Saturation] screen. The color saturation can be
adjustment from
adjusted using [
[Higher] to [Lower]
The closer the level is to [Higher], more lively the color of the image.
The closer the level is to [Lower], less lively the color of the image.
] or [ ].
] or [ ].
] or [ ].
Screen Functions and Character Entry Restrictions
Function
Color Balance Cancel
Yellow Low Mid. High
Y 0
Magenta
M +1
Cyan
C
0
Black
K +3
Color Balance (Y) Cancel
Low Density Mid. Density
+3 +3
0 0
-3 -3
Sharpness Cancel
Sharper
Normal
Softer
Color Saturation
Cancel
Higher
Normal
Lower
Save
0 -2
-2 +3
+1 +2
IE
0 0
IE
Save
High Density
+3
0
-3
Save
Save
95