Fuji Xerox DocuScan C4250A Setup And Quick Reference Manual page 50

2. Select the folder in which the desired "Save
In" location is registered.
Address Book Folder
01 02
Common Jones
04 05
Smith Jones
07 08
Potter Administration
10 11
(Not in Use) (Not in Use)
Note
• Selecting [01-12], [13-24], [25-36] or [37-48] on the
right side of the screen displays the corresponding
address folders.
• Password-lock folders are indicated with a "lock" icon.
• If a password is set to the folder, the following
password entry screen appears. If the screen
appears, enter the password using the numeric
keypad and select [Confirm].
Password
Folder Name: 01 Common
*****
3. On the [Address Book] screen, select the
"Save In" location.
Address Book [01]
Search...
001 SMB Exterior Designs
002 FTP Design Concept
003 SMB Minutes
004 FTP Software Specifications
005 FTP Hardware Specifications
Note
• If you need to search for the "Save In" location, refer
to "Address Book and Subject/Comment List" in the
User Guide.
50
4 Scan
Close
03
01-12
Accounting
06
13-24
Brown
09
25-36
Misc.
12
37-48
(Not in Use)
Cancel Confirm
To Folder Close
Details...
1
• If you select [Details...] after selecting the "Save In"
location, you can view the details of the "Save In"
location.
Details #.001
Recipient Name
Transfer Protocol
Server/IP Address
Shared Name
Save In
Port Number
4. Select [Close].
[Server], [Shared Name], [Save In], [User
Name], and [Password] are entered
automatically based on the information
entered for the "Save In" location in Address
Book.
Note
• [Shared Name] will not be displayed if saving the
scanned data on FTP.
Set the file name
Set the file name of the scanned data and the
action to be taken if a file name conflict occurs.
1. Select [Change File Name...].
The [Change File Name] screen appears.
2. The file name will be assigned automatically
if you do not specify it. To specify the file
name, enter the file name in [File Name]
within 20 characters.
Change File Name
File Name (Max. 20 chars.)
(Auto Set)
File Name Conflict
Change Name and Save
Refer to
• For information on how to enter characters on the
control panel, refer to "Character Entry Procedure"
(P.101).
Note
• Selecting [Restore Auto] restores the file name to the
default.
3. Select [File Name Conflict] to set the action
to be taken if a file name conflict occurs.
Close
Exterior Designs
SMB
192.168.1.100
Share
\Smith\Temp
139
Cancel Save
Restore Auto