Fuji Xerox DocuScan C4250A Setup And Quick Reference Manual page 53

Note
• The scanner has three USB connectors. To insert a
USB flash memory, one on the front side is the most
convenient. Other USB connectors can be used also
if the connector on the front side has malfunctioned.
Refer to
• More information on the location of each USB
connector, refer to "Main Components" (P.15).
4. The file name will be assigned automatically
if you do not specify it. To specify the file
name, select [Change File Name...].
Basic Scanning More Scan
Save In
Change File Name...
The USB Flash Memory
is inserted.
Do not remove it
while saving the data.
(You can remove it
when it is not saving)
The [Change File Name] screen appears.
5. Specify the file name and the action to be
taken if a file name conflict occurs, and
select [Save].
Note
• For information on how to set the file name or to
specify the action to be taken in case of a file name
conflict, refer to "Using Scan to PC" (P.48).
Set the basic scan features
As necessary, set the features such as [Output
Color] and [File Format] on the [Basic Scanning]
screen.
1. Select the [Basic Scanning] tab.
The [Basic Scanning] screen appears.
2. Select the buttons of the desired features,
and configure the settings.
Refer to
• For information about the features available on the
[Basic Scanning] screen, refer to "[Basic Scanning]
screen" (P.85).
• For information about how to set the feature available
on the [Basic Scanning] screen, refer to "2.7 Settings
the Basic Scan Features" in the User Guide.
Set other scan features
As necessary, set other scan features such as
[Scan Size] and [Reduce/Enlarge] on the [More
Scan Features] screen.
1. Select the [More Scan Features] tab.
Features
Preview
The [More Scan Features] screen appears.
2. Select the buttons for the desired features
and configure the settings.
Refer to
• For information about the features available on the
[More Scan Features] screen, refer to "[More Scan
Features] screen" (P.86).
• For information about how to set the features
available on the [More Scan Features] screen, refer to
"2.8 Setting Other Scan Features" in the User Guide.
Display the preview
As necessary, display the preview of the scanned
data and check the scan result.
Refer to
• For information on how to display the preview screen,
refer to "Displaying a Preview" (P.54).
Start the scan job
1. Display the [Save In] screen, and press the
<Start> button.
The scanning starts. When the scanning is
complete, the scanned data will be saved on
the media.
Save in: USB Flash Memory
A4
Full Color
200dpi
Pages
Scanned
10
Last Original
Important
• When the document is loaded into the document
feeder, do not hold it while it is being fed.
• Do not unplug the media from the USB connector
during scanning or while the data is being saved.
Note
• If a problem occurs, the touch panel displays a
message. Follow the instructions in the message to
remedy the problem. If an error code is displayed,
refer to "Error Codes" (P.72) for suggested solutions.
• It may take some time for the scanner to start
scanning. The scanner starts scanning after verifying
the status of the media.
When you have more documents to scan
When you have more documents to scan, refer to
"When you have more documents to scan" (P.47).
Pages
Transferred
70%
7
Next Original
Using Scan to Media
IE
IE
53