Mitsubishi MELSEC iQ-F FX5 series Programming Manual page 809

■Operation result
1.
Function without EN/ENO
The following table lists the operation results.
Operation result
No operation error occurred
An operation error occurred
2.
Function with EN/ENO
The following table lists the execution conditions and operation results.
Execution condition
EN
TRUE (Executes operation)
FALSE (Stops operation)
*1 When FALSE is output from ENO, data output from (d) is undefined. In that case, modify a program so that the data output from (d) is
not used.
Operation error
• (s1), (s2), and (s3) are INT or WORD
Error code Description
(SD0/SD8067)
3405 The lower limit value specified by (s1) is greater than the upper limit value specified by (s2).
• (s1), (s2), and (s3) are DINT, DWORD, or TIME
Error code Description
(SD0/SD8067)
3405 The lower limit value specified by (s1) is greater than the upper limit value specified by (s2).
• (s1), (s2), and (s3) are BOOL
Error code Description
(SD0/SD8067)
3405 The lower limit value specified by (s1) is greater than the upper limit value specified by (s3).
• (s1), (s2), and (s3) are the REAL type
Error code Description
(SD0/SD8067)
3402 The value of (s1) is outside the following range.
-126 |(s1)|<2
0, 2
The data specified by (s1) is -0, denormalized number, NaN (not a number), or .
The value of (s2) is outside the following range.
-126 |(s2)|<2
0, 2
The data specified by (s2) is -0, denormalized number, NaN (not a number), or .
The value of (s3) is outside the following range.
-126 |(s3)|<2
0, 2
The data specified by (s3) is -0, denormalized number, NaN (not a number), or .
3405 The lower limit value specified by (s1) is greater than the upper limit value specified by (s3).
• (s1), (s2), and (s3) are STRING
Error code Description
(SD0/SD8067)
2820 "00H" is not set to a label specified by (s1), (s2), and (s3) or devices from specified device number to the end device number of
corresponding device.
3405 The lower limit value specified by (s1) is greater than the upper limit value specified by (s3).
The character strings specified by (s1), (s2), and (s3) have more than 16383 characters.
3406 The specified character string cannot be stored in a label specified by (d) or devices from specified device number to the end device
number of corresponding device.
Operation result
ENO
TRUE (Operation error did not occur)
FALSE (Operation error occurred)
*1
FALSE
128
128
128
(d)
Operation output value
Indefinite value
(d)
Operation output value
*1
Indefinite value
Indefinite value
20 SELECTION FUNCTIONS
20.3 Limit Control
20
807