Mitsubishi MELSEC iQ-F FX5 series Programming Manual page 550

• The following table shows example of search result table configuration and data. (n=10)
Searched device Searched data
(s1) (s1) value (example)
(s1) K100
(s1)+1 K111
(s1)+2 K100
(s1)+3 K98
(s1)+4 K123
(s1)+5 K66
(s1)+6 K100
(s1)+7 K95
(s1)+8 K210
(s1)+9 K88
• The following table shows example of search result table.
Device number
(d)
(d)+1
(d)+2
(d)+3
(d)+4
Precautions
• Comparison is executed algebraically. (-10<2)
• When there are two or more maximum or minimum values in the searched data, the last position of the max/min is stored
respectively.
• When these instructions are driven, five devices ((d), (d)+1, (d)+2, (d)+3, and (d)+4) are occupied for storing the search
result (d). Make sure that these devices are not used in other controls for the machine.
Operation error
Error code Description
(SD0/SD8067)
2820 The device range specified by (s1) or (d) exceeds the corresponding device range.
3405 The value stored in a device specified by (n) is 0.
7 APPLICATION INSTRUCTION
548
7.17 Data operation instruction
Comparison data Data position
(s2) value (example)
K100 0
1
2
3
4
5
6
7
8
9
Description
3
0
6
5
8
Search result
Maximum Same (d)
value (d)+4
 (First time)

 (Last)

Search result item
Number of same data
Same data position (first position)
Same data position (last position)
Minimum value position (last position)
Maximum value position (last position)
Minimum
value (d)+3
