Cursor Movement; Registering A New Program Name - Yamaha RCX142 User Manual

10. "PROGRAM" mode
4
58
4-
Valid keys and submenu descriptions in "PROGRAM >DIR" mode are shown below.
Valid keys Menu
Cursor key
Selects the program or scrolls the screen vertically.
( ↑ / ↓ )
Cursor key
Switches between the program information display and the date/time display.
(← / →)
Page key
Switches to other screens.
( / )
NEW Registers a new program name.
F1
Shows the number of bytes used for the entire program.
F5 INFO
Copies the program.
F6 COPY
F7 ERASE Erases the program.
Renames the program.
F8 RENAME
Changes the program attribute.
F10 ATTRBT
F11 OBJECT Shows the object program information.
Automatically creates the program name "FUNCTION".
F15 EXAMPLE
10.3.1

Cursor movement

[Procedure]
To select the program, use the cursor (↑/↓) keys in "PROGRAM>DIR" mode.
The pointer cursor moves to the selected program number.
The program name is displayed at the right end on the system line (1st line).
10.3.2

Registering a new program name

When creating a new program, you must first register the program name.
[Procedure]
1) In "PROGRAM>DIR" mode, press the
"PROGRAM>DIR>NEW" mode.
The message "Enter program name > " appears on the guideline.
2) Use the to
0 9
name.
A maximum of 8 characters can be used. (Press the
cancel the data input.)
Function
(NEW) key to enter
F 1
, to or
A Z _
ESC
keys to enter a program
key if you want to