Removing The Fork Protector; Installing The Fork Protector; Conducting Major Fork Service - Husqvarna FC 350 2014 Repair Manual

6
FORK, TRIPLE CLAMP
6.9
Removing the fork rotector
6.10 Installing the fork rotector

Conducting major fork service

Info
The steps are identical for both fork legs.
-
Position the brake caliper. Mount and tighten screws
Guideline
Screw, front brake caliper
-
Position the brake line and clamp. Mount and tighten screws
Finishing work
-
Install the front wheel. (,... p. 93)
Preparatory work
-
Raise the motorcycle with the lift stand. (,... p. 10)
-
Remove the front wheel. (,... p. 92)
-
Remove the fork legs. (,... p. 14)
Main work
Remove screws
-
Remove the screws on the right fork leg. Remove the fork protector from above.
B00306-10
Main work
-
Position the fork protection on the left fork leg. Mount and tighten screws
Guideline
I
Remaining screws, chassis
-
Position the fork protection on the right fork leg. Mount and tighten the screws.
Guideline
I
Remaining screws, chassis
B00306-10
Finishing work
-
Install the fork legs. (,... p. 14)
-
Install the front wheel. (,... p. 93)
Condition
The fork legs are disassembled.
M8
O
on the left fork leg. Remove the fork protector from above.
@).
25 Nm
Loctite 243
®
(18.4 lbf ft)
8-
I 10Nm(7.4Ibf ft)
10 Nm (7.4 lbf ft)
15
™
0-