Mac Filter - TP-Link TD-W8960N User Manual

4.5.4

MAC Filter

Go to Wireless → MAC
Wireless access can be filtered by using the MAC addresses of the wireless devices transmitting
within your network's RADIUS. To filter wireless users by MAC Address, either permitting or
blocking access. If you do not wish to filter users by MAC Address, select Disabled.
Disabled: Select this option to disable MAC Filter function.

Allow: Select this option to enable MAC Filter function that allow wireless access by the

devices listed on this screen.
Deny: Select this option to enable MAC Filter function that block wireless access from the

devices listed on this screen.
Add: Click this button to add the MAC Address.

Remove: Select the item of the MAC Address and click this button to remove it.

When you click Add, the pop-up picture shown below, and then you can type the MAC Address in
the MAC Address field.

Note:
The form of MAC Address must be "xx:xx:xx:xx:xx:xx", like "00:13:0A:55:FF:09".
Click Save/Apply to save the changes.
Filter, you will see the screen of MAC Filter settings.
63
TD-W8960N User Guide