TP-Link TD-W8960N User Manual page 29

7. Configure the DNS Server Addresses on the screen as follows.

Note:
If only single PVC with IPoA is configured, you must enter static DNS server IP addresses.
8. On the next screen you will see the detailed settings you've made. Please click
save these settings.
4.3.2.3 ATM-EoA-Bridging
If you want to adopt the
below to add a WAN service over a selected ATM interface:
1. Add a new ATM interface (see
2. Click Add and select WAN Service Interface over ATM PVC on the next screen.
3. Select Bridging option for the
4. On the screen you will see the detailed settings you've made. Please click
these settings.
Bridge service and you need to use an ATM Interface, follow the steps
4.3.1.1 ATM
WAN service type
Interface).
on the screen, and click
22
TD-W8960N User Guide
Save/Apply
Next to continue.
Save/Apply to save
to