Nat - TP-Link TD-W8960N User Manual
300mbps wireless n adsl2+ modem router
Hide thumbs
Also See for TD-W8960N:
- User manual (122 pages) ,
- Installation manual (24 pages) ,
- Quick installation manual (16 pages)
Table of Contents
Advertisement
Leased Time (hour): The Leased Time is the amount of time in which a network user will
•
be allowed to connect to the modem router with their current dynamic IPv6 address.
Enter the amount of time, in hours, then the user will be "leased" this dynamic IPv6
address. After the dynamic IPv6 address has expired, the user will be automatically
assigned a new dynamic IPv6 address. The default is 24 hours.
For RADVD:
1) If
Randomly Generate
2) If
Statically Configure
Prefix: Enter a value for the site prefix.
•
Click
Save/Apply
to make the configuration effective.
4.3.5
NAT
NAT (Network Address Translation) allows you to share one WAN (Wide Area Network) IP
address for multiple computers on your LAN (Local Area Network).
Note:
When you select
PPPoA
IPoA
and
IPoE
connection
is selected, it doesn't need to be configured.
is selected, please complete the following parameters.
or
PPPoE
for the WAN Setup, or when you select
(4.3.2 WAN
Service), you will see the
NAT
menu in the Web-based Utility.
27
TD-W8960N User Guide
Enable NAT
for the type of
Advertisement
Table of Contents
