TP-Link TD-W8960N User Manual page 21

Add: Click to add a new interface in the next screen.

VPI/VCI: the VPI and VCI values provided by your ISP. Do not change them unless it was

required by your ISP.
DSL Link Type: Select the DSL Link Type provided by your ISP. The options include

is for PPPoE, IPoE, and Bridge),
Encapsulation Mode: The mode of data processing over the Link Type you have selected.

Use the default settings, if you are not sure.
Service Category: Select the type of the service assigned by your ISP in the drop-down list.

The default type is

Note:
The detailed configuration about
Quality of Service.
PPPoA
UBR Without PCR.
Scheduler for Queues of Equal Precedence
(PPP over ATM) and
14
TD-W8960N User Guide
IPoA (IP over ATM).
will be described in
EoA (it