Ports And Buttons - TP-Link TD-W8960N User Manual
300mbps wireless n adsl2+ modem router
Hide thumbs
Also See for TD-W8960N:
- User manual (122 pages) ,
- Installation manual (24 pages) ,
- Quick installation manual (16 pages)
Table of Contents
Advertisement
(WPS)
(LAN1-4)
Note:
1)
If the ADSL LED is off, please check your internet connection first. Refer to
Modem Router
for more information about how to make internet connection correctly. If you have
already made a right connection, please contact your ISP to make sure if your internet service is
available now.
2)
If the Internet LED is off, please check your ADSL LED first. If your ADSL LED is also off, please
refer to
Note
1. If your ADSL LED is GREEN ON, please check your internet configuration. You
may need to check this part of information with your ISP and make sure everything have been input
correctly. Refer to
1.2.2
Ports and Buttons
ADSL: Connect to the Modem Port of Splitter or to the telephone line.
LAN4/WAN, LAN3, LAN2, LAN1: Through these ports, you can connect the router to your PC
or the other Ethernet network devices. Enable EWAN function and you will be able to connect
to Cable/FTTH/ADSL device.
WiFi: The switch for the Wi-Fi function.
WPS/RESET:
1) WPS function: For details, please refer to
2) Reset the modem router: With the modem router powered on, press and hold down the
WPS/RESET button on the rear panel of the modem router for more than 5 seconds and then
release it. If all LEDs turn on momentarily, you restore the modem router successfully.
A wireless device has been successfully added to the network by
On
WPS function.
WPS handshaking is in process and will continue for about 2
Flash
minutes. Please press the WPS button on other wireless devices
that you want to add to the network while the LED is flashing.
The WPS function is disabled or the wireless device fails to be
Off
added to the network in 2 minutes after WPS function is enabled.
For more information, please refer to
On
There is a device connected to this LAN port.
The modem router is sending or receiving data over this LAN
Flash
port.
Off
There is no device connected to this LAN port.
4.2 Device Info
for more information.
WPS
Setup.
3
TD-W8960N User Guide
WPS
Setup.
2.3 Connecting the
Advertisement
Table of Contents
