Basic - TP-Link TD-W8960N User Manual

4.5.1

Basic

Go to Wireless → Basic, you can configure the basic settings for wireless networking.
This page allows you to configure basic features of the wireless LAN interface. You can enable or
disable the wireless LAN interface, hide the network from active scans and set the wireless
network name (also known as SSID).
 Enable Wireless: If you want to use wireless features, you must select "Enable Wireless". If
you deselect "Enable Wireless" option, the wireless network will be disabled.
 Hide Access Point: When wireless clients survey the local area for wireless networks to
associate with, you can select this option to avoid being surveyed.
 Clients Isolation: Select this option to enable AP isolation function so that stations associated
to the AP will not be able to communicate with each other.
 SSID: SSID (Wireless network name) shared among all points in a wireless network. The SSID
must be identical for all devices in the wireless network. It is case-sensitive and must not
exceed 32 characters (use any of the characters on the keyboard). Make sure this setting is the
same for all stations in your wireless network. Type the desired SSID in the space provided.
 BSSID: Show the MAC address of the router's wireless network.
 Max Clients: The maximum number of wireless clients that can connect to the router.
Click Save/Apply to make the settings effective.
50
TD-W8960N User Guide