Wireless Bridge - TP-Link TD-W8960N User Manual

4.5.5

Wireless Bridge

Go to Wireless → Wireless
interface.
AP Mode: Select an AP Mode from the drop-down list. Options available are: Access Point

and Wireless Bridge.
• Access Point: Select this option to allow wireless stations including AP clients to access.
• Wireless Bridge: Also known as WDS (Wireless Distribution System), it will bridge the
wireless stations in bridge mode.
Bridge Restrict:

• Disabled: Select this option to disables wireless bridge restriction, that any wireless bridge
will be granted access.
• Enabled: Select this option to enable wireless bridge restriction, please enter the MAC
address of the Remote Bridges that you want to connect with, and only these Remote
Bridges are granted access.
• Enabled (Scan): Select this option to enables wireless bridge restriction, and it will scan
the environment for APs that exist around the device. Only those selected AP will be
granted access.
• Refresh: Click to scan and display the APs.

Note:
1) Only Open or Shared authentication method support wireless bridge, you should choose
→ Security to change authentication method to "open" or "shared" mode first.
2) The AP that our router bridges to also should input our router's BSSID (MAC Address).
Bridge, you can configure wireless bridge features of the wireless LAN
64
TD-W8960N User Guide
Wireless