Table 2 has the following columns:
● Port
This column shows all the ports available on the device as well as the link aggregations.
● Setting
With this check box, you enable or disable GMRP for the port or link aggregation.
Steps in configuration
Enabling the sending of GMRP frames for an individual port
1. Select the "GMRPGMRP" check box.
2. Select the check box in the relevant row in table 2.
3. To apply the changes, click the "Set Values" button.
Enabling the sending of GMRP frames for all ports
1. Select the "GMRPGMRP" check box.
2. In the "Setting" drop-down list, select the "Enabled" entry.
3. Click the "Copy to table" button. The check box is enabled for all ports in table 2.
4. To apply the changes, click the "Set Values" button.
5.5.15.4
Multicast blocking
Disabling the forwarding of unknown multicast frames
On this page, you can block the forwarding of unknown multicast frames for individual ports.
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04
Configuring with Web Based Management
5.5 The "Layer 2" menu
231