Management Acl - Siemens SCALANCE XB-200 Configuration Manual

Configuring with Web Based Management
5.7 The "Security" menu
Enabling authentication for all ports
1. Select the required options in table 1.
2. Click the "Copy to table" button. The relevant settings are adopted for all ports in table 2.
3. To apply the changes, click the "Set Values" button.
5.7.5

Management ACL

Description of configuration
On this page, you can increase the security of your device. To specify which station with
which IP address is allowed to access your device, configure the IP address or an entire
address range.
You can select the protocols and the ports of the station with which it is allowed to access
the device.
Description of the displayed boxes
Note
Before you enable this function, note the following
A bad configuration may mean that you can no longer access the device. You can then only
remedy this by resetting the device to the factory defaults and then reconfiguring. You should
therefore configure an access rule that allows access to the management before you enable
the function.
258
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04