Button - Siemens SCALANCE XB-200 Configuration Manual

Configuring with Web Based Management
5.4 The "System" menu
5.4.12

Button

Availability of the buttons
Depending on your IE switch, different buttons and functions are available, see section
"System functions hardware equipment (Page 11)".
Functionality of the button
You will find a detailed description of the function available with the button in the device
operating instructions.
On this page, the functionality of the button can be enabled or disabled.
Description of the displayed boxes
The following functions are possible:
● Restore Factory Defaults
if you select the check box, you can execute the function "Restore Factory Defaults" via
the button.
● Redundancy Manager
If you select the check box, you can activate or deactivate the "Redundancy Manager"
function via the button.
● Set Fault Mask
If you select the check box, you can define the fault mask via the button.
142
CAUTION
Button function "Restore Factory Defaults" active during startup
If you have disabled this function in your configuration, disabling is only valid during
operation. When restarting, for example after power down, the function is active until the
configuration is loaded so that the device can inadvertently be reset to the factory
settings. This may cause unwanted disruption in network operation since the device
then needs to be reconfigured. An inserted PLUG is also deleted and returned to the
status as shipped.
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04