Siemens SCALANCE XB-200 Configuration Manual page 206

Configuring with Web Based Management
5.5 The "Layer 2" menu
Description of the displayed boxes
The page contains the following box:
● MSTP Instance ID
In the drop-down list, select the ID of the MSTP instance.
Table 1 has the following columns:
● 1st column
Shows that the settings are valid for all ports.
● MSTP Status
Select the setting from the drop-down list. You have the following setting options:
– Enabled
– Disabled
– No Change: Table 2 remains unchanged.
● Copy to Table
If you click the button, the setting is adopted for all ports of table 2.
Table 2 has the following columns:
● Port
Shows all available ports and link aggregations.
● MSTP Instance ID
ID of the MSTP instance.
● MSTP Status
Click the check box to enable or disable this option.
● Priority
Enter the priority of the port. The priority is only evaluated when the path costs are the
same.
The value must be divisible by 16. If the value that cannot be divided by 16, the value is
automatically adapted.
Range of values: 0 - 240.
Factory setting: 128
● Cost Calc.
Enter the path cost calculation in the input box. If you enter the value "0" here, the
automatically calculated value is displayed in the next box "Path Costs".
206
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04