Siemens SCALANCE XB-200 Configuration Manual page 82

Configuring with Web Based Management
5.3 The "Information" menu
● SNMP
You can configure the setting in "System > SNMP > General".
– "-" (SNMP disabled)
– SNMPv1/v2c/v3
– SNMPv3
● Management ACL
You configure the setting in "Security > ManagementACL".
– Disabled: no access restriction
– Enabled: no access restriction
– Enabled: restricted access only
● Login Authentication
You configure the setting in "Security > AAA > General".
– Local
– RADIUS
– Local and RADIUS
– RADIUS and fallback local
82
Access to device parameters via SNMP is not possible.
Access to device parameters is possible with SNMP versions 1, 2c or 3.
Access to device parameters is possible only with SNMP version 3.
The access control is disabled.
The access control is enabled but no access rules have been defined.
The access control is enabled and access rules have been defined.
The authentication must be made locally on the device.
The authentication must be handled via a RADIUS server.
The authentication is possible both with the users that exist on the device (user name
and password) and via a RADIUS server.
The user is first searched for in the local database. If the user does not exist there, a
RADIUS query is sent.
The authentication must be handled via a RADIUS server.
A local authentication is performed only when the RADIUS server cannot be reached
in the network.
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04