Configuring with Web Based Management
5.5 The "Layer 2" menu
Description of the displayed values
The table has the following columns:
● DSCP
Shows the DSCP priority of the incoming frames.
● Queue
From the drop-down list, select the queue that is assigned to the DSCP priority.
The higher the queue number the higher the processing priority
The DSCP priorities are assigned to the queues as default as follows:
● DSCP codes 0 - 15 → Queue 1
● DSCP codes 16 - 31 → Queue 2
● DSCP codes 32 - 47 → Queue 3
● DSCP codes 48 - 63 → Queue 4
Steps in configuration
1. For each value in the "DSCP" column, select the queue from the "Queue" drop-down list.
2. Click the "Set Values" button.
174
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04