Siemens SCALANCE XB-200 Configuration Manual page 237

Settings
Table 1 has the following columns:
● 1st column
Shows that the settings are valid for all ports.
● Setting
Select the required setting. If "No Change" is selected, the entry in table 2 remains
unchanged.
● Entries
Enter the maximum number of samples to be stored at the same time. If "No Change" is
entered, the entry in table 2 remains unchanged
● Interval [s]
Enter the interval after which the current status of the statistics will be saved as a sample.
If "No Change" is entered, the entry in table 2 remains unchanged
● Copy to Table
If you click the button, the settings are adopted for all ports of table 2.
Table 2 has the following columns:
● Port
Shows the port to which the settings relate.
● Setting
Enable or disable the recording of the history on the relevant port.
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04
Configuring with Web Based Management
5.5 The "Layer 2" menu
237