Dscp Map - Siemens SCALANCE XB-200 Configuration Manual

Description of the displayed boxes
The table has the following columns:
● CoS
Shows the CoS priority of the incoming frames.
● Queue
From the drop-down list, select the queue that is assigned to the CoS priority.
The higher the number of the Queue, the higher the processing priority.
The service classes (CoS) are assigned to the queues as default as follows:
● COS 0 → Queue 2
● COS 1 → Queue 1
● COS 2 → Queue 1
● COS 3 → Queue 2
● COS 4 → Queue 3
● COS 5 → Queue 3
● COS 6 → Queue 4
● COS 7 → Queue 4
Steps in configuration
1. For each value in the "CoS" column, select the queue from the "Queue" drop-down list.
2. Click the "Set Values" button.
5.5.2.3

DSCP Map

DSCP queue
On this page, you can assign DSCP priorities to different Queues.
SCALANCE XB-200/XC-200/XP-200 Web Based Management
Configuration Manual, 07/2016, C79000-G8976-C360-04
Configuring with Web Based Management
5.5 The "Layer 2" menu
173