Rectangular Coordinate Measurement; Station Point Setup - Pentax Visio R-400VDN Series Quick Reference Manual

6. Rectangular Coordinate Measurement

POWER TOPO LITE
MAIN MENU

6.1 Station Point Setup

To select from the memory:
LIST
select
F2
the point by
Or to input the station point information:
ENT
STATION POINT
SETUP
ENT
repeat to
input value
NOTE: The input item (cursor position) may be selected by
F3
To input PC (point code):
move cursor to PC
NOTE: Input items are PN (point name), X,Y, Z, IH (instrument
height), and PC (point code).
If the input PN already exists in the memory, then the
corresponding point information (coordinate & point code)
is displayed in the screen.
The result of Free Station, prior to stakeout, is automatically
set in each field of Station Setup.
ENT
MEAS
F2
FIND PN
F2
input Point
Name by
ESC
to quit
input PC (point code)
ENT
,
F4
ENT
select a PC from the list by
ENT
input a new PC by using
STATION POINT
SETUP
ENT
ACCEPT
F5
F4
TO 123
,
F1 F5
SAVE ACCEPT
or
F1 F5
F1
,
0
23
H. ANGLE
SETUP
0 9 .
DEF
H. ANGLE
SETUP
ENT
F1 F4
TO 123
F5
9 .
DEF
ENT