Preference; Coordinate Axis Definition - Pentax R-200 Series Instruction Manual

Followings are possible function and the factory default settings.:
FUNCTION
A Language other than the English can be selected.
Coordinate system can be selected.
Character input method can be selected.
Action input method can be selected.
The offset (remote) method can be selected.
Compare method can be selected.
Aiming on/off can be selected.
EDM (electronic distance meter) settings can be
selected.
PRIM. MEAS KEY,
SEC. MEAS KEY,
MEAS. MIN DISP (only R-322EX/NX,
R323R-323EX/NX),
TRACK MIN DISP,
SHOT COUNT,
SHOT INPUT.
Elevation factor can be defined.
AVE.ELEV.
SCALE FACT
Duplicate point name checking SCALE FACT
Press [F4][PREF] of the PowerTopoLite screen to view the PREFERENCE screen.
1. COORD.SYSTEM
2. INPUT METHOD : FULL TEMPLATE
3. ACTION METHOD :PROCESS TYPE
4. REMOTE METHOD:FIXED PLANE
5.COMPARE METHOD:ALLIN ONE INFO.

14.1 Coordinate axis definition

Select 21. COORD.AXIS by pressing the down arrow key, and press [ENT] to view the coordinate
system definition window. Press [ENT] to select and press [F5][ACCEPT] to enter.
Height
90° CCW
(Right angle)
Definition of each selection is as follows.

14. PREFERENCE

(User difined)
Basis direction
90° CW
Right angle
Station
Point
Default settings
"English"
(cf. Coordinate axis definition )
"FULL TEMPLATE"
"PROCESS TYPE"
"FIXED PLANE"
"ALL IN ONE VIEW"
"OFF"
"MEAS. SHOT"
"TRACK CONT"
"COARSE"
"COARSE"
"1 TIME"
"01 TIME"
+0000.0000m
1.00000000
"OFF"1.00000000
5.COMPARE METHOD :ALL IN ONE INFO.
6.REQUEST AIMING : OFF
7.EDM SETTINGS
8.ELEV. FACTOR
9. DUPLICATE PN CHK
1. COORD.SYSTEM
2. INPUT METHOD : FULL TEMPLATE
3. ACTION METHOD :PROCESS TYPE
4. REMOTE METHOD:FIXED PLANE
5.COMPARE METHOD:ALL IN ONE INFO.
96
:OFF