Measurement At A Corner Point - Pentax Visio R-400VDN Series Quick Reference Manual

NOTE: The corner point is the foresight of the traverse, which is
the next instrument point and must be ended by
If required, select the target by

11.2 Measurement at a Corner Point

TRAVERSE
MENU
Station Setup:
(the last corner point is displayed as Station)
NOTE: Input Instrument Height (IH), if necessary.
Orientation:
(sight the back sight point)
Side shot:
MEAS
repeat ,
F1
finish measurements by
NOTE: The corner point is the foresight of the traverse, which is
the next instrument point and must be ended by
If required, select the target by
ENT
F4
ENT
EDIT SAVE
, for all side shots
F4 F2
MEAS EDIT
,
F1 F4
PAGE TARGET
x2
F5 F2
ACCEPT
F5
at the
ENT
,
Corner Point
PAGE TARGET
F5 F2
36
ENT
before each
measurement.
ESC
TRAVERSE
MENU
ENT
.
before each
measurement.