Event History - Interlogix ZEROWIRE ZW-6404 Installation Manual

Example: Perform a communicator test
Call your central monitoring station and
1. tell them you are performing a
communicator test.
2.
YOUR 4 TO 8 DIGIT INSTALLER CODE
3.
4.
The central monitoring station will
5.
confirm the test message was received.
6. MENU
If the communicator test fails, notify your
7.
service provider.

Event History

The Event History menu is used to listen to events that occurred in your security system.
These events include arming, disarming, system faults and alarmed zones. Ensure your
clock is set correctly as all events are time stamped.
"Alarm Memory" will announce the last zone(s) that caused your security system to go into
an alarm condition:
1.
YOUR 4 TO 8 DIGIT MASTER CODE
2.
3.
4.
It is recommended you record user names, zone names, and outputs names in Menu 8 –
Recordings. This will make reviewing any events much clearer as ZeroWire will announce
the recorded name.
72
MENU 4
ENTER
2
MENU MENU
HISTORY
ENTER
1
MENU
Select main menu - Option 4, System Test.
Select communicator test.
Exit from the menu.
Select History Menu.
Listen to the last alarm memory event.
Exit from History Menu.