Wireless Lan Setup - Interlogix ZEROWIRE ZW-6404 Installation Manual

Wireless LAN Setup

Use a mobile device to connect ZeroWire to your existing WiFi network. The wireless
router must support 802.11 b or 802.11g.
Initial address http://192.168.1.3
1. Turn on WiFi Discovery Mode
A temporary WiFi Discovery Mode allows an initial configuration from a mobile device such
as a smart phone or tablet. This wireless connection is between the ZeroWire and the
mobile device only.
http://192.168.1.3
MENU
1.
YOUR 4 TO 8 DIGIT INSTALLER CODE
2.
3.
MENU
4.
2. Enable WiFi on your mobile device.
3. On your mobile device, browse for available WiFi networks and select the
'ZeroWire_xxxx" network to connect to it.
Note: Some devices have a "smart" feature which will check if the WiFi point has
access to the internet. If no internet is detected, the device will reconnect to another
ZeroWire Installation Manual
9
ENTER
8
MENU
Wireless Router
Select main menu - Option 9, Advanced system
configuration.
Enter your Installer code.
Turn on WiFi Discovery Mode for 10 minutes.
Exits from Advanced system configuration menu.
To internet
27