Table of Contents
Advertisement
30
Alliance System
User Manual
Table 14 lists the display options.
Table 14. Bypass zones menu options
Option
Display the complete zone name.
Update the zone list and display the next zone on the list (if any).
Exit menu 4.
Exit the menu option and return to the original display.
System menu option 5, History
Use this menu to list past events of the system history, including alarms, access to the menu, etc. You can
determine events such as the time that an alarm occurred, the time it was reset, and which user reset it. The
menu displays the most recent event first.
There are two types of events listed:
Alarm Events: All events related to the alarm system
Log-Only Events: Events that are not reported to the central station but are sent to a local printer or
computer instead (e.g. access granted/denied at doors).
List past events of the system history
To list past events of the system history, do the following:
1. Press MENU* (Figure 1), enter your user
PIN code, and press ENTER (Figure 1).
2. Enter 5 (for menu 5) and press ENTER. The
keypad displays the list events selection
menu. (Figure 22).
3. Select the event list.
3a. Enter 1 and press ENTER to list alarm
events.
Or
3b. Enter 2 and press ENTER to list log-
only events (Figure 23).
Action
Enter the zone number and press ENTER.
Press ON/NEXT.
Press ENTER.
Press CLEAR.
Figure 22. Enter Access Code screen
1-Alarm Events 2-Log Only Events
Option:
Figure 23. Log only events
13:49 26/11 Menu Entered at Keypad 1
1-Scan, 0-Exit
Advertisement
Table of Contents
