Interlogix ZEROWIRE ZW-6404 Installation Manual page 83

Removing ZeroWire from existing Z-Wave network as
Secondary Controller
1. Log in to ZeroWire Web Server or UltraSync + app.
2. Click Settings, Z-Wave Add/Remove.
3. Start the Remove process on the primary controller of the existing network.
4. Press the Exclude button on the Zerowire (the secondary device):
5. Primary Controller will remove ZeroWire from it.
6. ZeroWire status will update to indicate it has been added as Secondary Controller.
7. Save settings on Primary Controller.
ZeroWire Installation Manual 83